Company News

Modern metal shell wood drying rooms are almost all made of aluminum alloy materials. They have a beautiful appearance and can be used to build various large drying rooms in the open air.

Conventional aluminium alloy drying kiln,Exported to Chile, South America, packing and shipping tidbits!Made in China, old customers repurchase! I am grateful to meet every customer, every order is due to trust and recognition, and every satisfaction comes from quality!

Furnace gas drying chamber is a general term for various drying chambers with furnace gas as the heat source. According to the different heating methods, it can be divided into three types: furnace gas drying room, furnace gas indirect heating drying room and hot air drying room.

The requirement of the wood drying control system is to meet the control purpose to the greatest extent, and it should have the following characteristics:

In January of this year, the Chilean customer placed the first order, and this month, the customer placed another order, thank you for your trust.

In the pile, two adjacent layers of wood should be evenly separated by spacers, forming a horizontal airflow channel at the height of the pile. In the middle of these passages, the drying medium and the surface of the wood carry out heat and moisture exchange that is conducive to the gradual drying of the wood.

(1) The start of the drying room. Close the inlet and exhaust ducts; start the fans. For a reversible circulation drying room with multiple fans, start the fans one by one. Do not start several fans at the same time to avoid overloading the circuit; open the valve of the bypass pipe of the steam trap and open it slowly. Heater, to make the heating system heat up slowly and discharge the air, water and rust in the piping system at the same time, when a large amount of steam is ejected from the bypass pipe, then close the valve of the bypass pipe and open the steam trap valve to make the steam trap work normally .

Compared with the continuous type, the periodic type has great flexibility, wide adaptability, easy adjustment of temperature and moderate temperature, and can perform humidity control treatment, while the forced circulation is more uniform than the natural circulation, and the loading quantity is large, the drying time is short, and the drying efficiency is high. . Therefore, periodic circulation drying chambers are often used in production. There are many structural forms of this type of drying chamber, and their performance characteristics are not nearly the same. Periodic forced circulation drying is divided into four types according to the arrangement of fans in the drying room: indoor top fan type, indoor side fan type, indoor end fan type and jet type.

In October and November of this year, the company updated some certificates

The working capacity of the heat pump dryer is related to the environment in which it is used. After one year of continuous use, the interior of the heat pump dryer unit may become dirty and the working capacity will decrease. Therefore, special equipment inspection and equipment maintenance must be carried out. For this kind of inspection and maintenance work, it is recommended that you contact the heat pump dryer manufacturer or its maintenance department. Users should pay attention when using and maintaining this unit: all safety protection devices in the unit are set before leaving the factory, and do not adjust it by yourself. .