1. Circular drying method This method is mainly applicable to wood such as Korean pine, Masson pine, and spruce. When operating, the wood needs to be divided into two parts: one part is placed in the center of the drying kiln, and the other part is placed around the drying kiln. This method can make the wood dry more evenly.

Drying process of wood drying kiln is divided into three phases, respectively, preheat treatment stage, intermediate stage of processing and normal drying stage.Must be strictly implemented in the process of drying drying process, good grasp of the temperature and time to prevent drying is not complete.

Using ThermoWood in place of regular wood presents several advantages, including but not limited to: Durability: As the wood is treated and becomes more resistant to the effects of insects, decay, and rot, ThermoWood can be used in a variety of outdoor applications without fear of degradation from weather exposure.

Wood drying is a relatively complex process. There are many specifications, varieties and uses of wood. Each enterprise needs to work out a drying process that suits its own products according to its own production characteristics. Thereby ensuring the dry quality of the wood.

To ensure the smooth progress of the wood drying process, it is necessary to conduct a systematic inspection of the facilities in the drying room before each drying, especially the internal facilities. Otherwise, if problems occur during the drying process, it will seriously affect the production cycle and drying quality of wood drying, and also have an impact on the service life of the drying equipment. The equipment inspection before drying mainly includes the inspection of the various systems that make up the drying chamber.

In a living tree, its fibrous roots continuously transport water from the soil through the trunk to the leaves, so the trunk contains a lot of water. After the living tree is felled and sawn into various specifications of sawn timber, some or most of the moisture remains inside the timber, which is the origin of the moisture in the timber. Boards and squares made from freshly felled trees are called green timber.

Drying kiln is used in industrial production of a large drying equipment, in the cement industry, metallurgical industry, wood drying, brick and tile drying production has a wide range of applications. In the process of drying kiln, the reaction temperature of kiln body is high, so the acquisition and monitoring of process parameters such as kiln body temperature is an important link to ensure the quality of roasting.

Before the wood drying kiln is used, a comprehensive and detailed inspection of its shell and equipment must be carried out to ensure the normal operation of the drying process. The specific inspection contents are as follows:(6)Inspection of drying quality(7)Setting and storage of drying materials

Wood drying is a relatively complex process. There are many specifications, varieties and uses of wood. Each enterprise needs to work out a drying process that suits its own products according to its own production characteristics. Thereby ensuring the dry quality of the wood.

Wood drying is a relatively complex process. There are many specifications, varieties and uses of wood. Each enterprise needs to work out a drying process that suits its own products according to its own production characteristics. Thereby ensuring the dry quality of the wood.