Steps for using a wood drying kiln
Chiqin Technology introduces the general steps for using a wood drying kiln:
Preparation:
Reasonably stack the wood that needs to be dried in the drying kiln, and pay attention to leaving appropriate ventilation space.
Check if the equipment of the drying kiln is functioning properly, such as the heating system, ventilation system, etc
Set parameters:
Set appropriate parameters such as temperature, humidity, and drying time based on factors such as the type and thickness of the wood.
Start the drying process:
Turn on the heating system and gradually increase the temperature inside the kiln.
Simultaneously activate the ventilation system to maintain air circulation and promote moisture evaporation.
Monitoring and adjustment:
Regularly monitor the moisture content of wood and parameters such as temperature and humidity inside the kiln.
According to the monitoring results, adjust the drying parameters in a timely manner to ensure the drying effect.
End of drying:
When the wood reaches the predetermined moisture content, stop heating and ventilation.
Let the wood cool naturally in the kiln for a period of time.
Remove the wood:
Carefully remove the dried wood from the kiln for subsequent processing or storage.
When using a wood drying kiln, the following points should also be noted:
Strictly follow the operating procedures of the equipment for operation.
Ensure good sealing of the drying kiln to prevent heat and moisture loss.
Records should be kept for different batches of wood in order to summarize experience and optimize drying processes.
Fujian Zhangping CHIQIN Technology Co. Ltd, is professional in wood drying over 20 years, covering Aluminum Wood Drying Kiln, Heat Pump Wood Drying Kiln without heat source, Veneer Drying Equipment, Wood carbonization kiln,Food Drying Kiln, Kiln Components etc with high quality and reasonable price. Hope to establish business relationship with you!
