A building or metal container specially used for drying wood that can adjust and control temperature, humidity and air flow speed according to process requirements. There are two categories: continuous drying kiln and periodic drying kiln.

wood drying curve When the wood is dried in a gaseous medium with a certain temperature and humidity, if the change of the moisture content of the wood is measured at regular intervals, and the time is taken as the abscissa and the moisture content is drawn on the ordinate, the curve is called the drying curve. (Figure 1-2). The drying process can be analyzed on the drying curve diagram. The whole process of wood drying can be divided into three stages.

CHIQIN Company is a company specializing in the production of various wood drying kilns and food drying kilns.  Safe production, reduce casualties and property losses has been the most important work of enterprises.

In a living tree, its fibrous roots continuously transport water from the soil through the trunk to the leaves, so the trunk contains a lot of water. After the living tree is felled and sawn into various specifications of sawn timber, some or most of the moisture remains inside the timber, which is the origin of the moisture in the timber. Boards and squares made from freshly felled trees are called green timber.

The spacers are placed correctly, the size of the pile is suitable, the stacking in the kiln is uniform, and the air flow is in good condition.

The track type veneer kiln is a patented veneer drying equipment independently developed by our company. The following is a comparison of the advantages and disadvantages between track type veneer drying kilns and roller type dryers

Wood drying kilns are very common in the industrial production field. There are currently three commonly used wood drying methods: furnace gas drying, steam drying, and microwave drying. Each of these three drying methods has its own advantages, and everyone must choose according to actual needs when choosing.