Three main external factors which affect the speed of wood drying equipment.

The 21st century is in a shortage of resources, will need much energy-saving and environmental protection, especially our timber resources are becoming increasingly scarce, but China’s timber resource utilization is not high. The waste of timber, mostly due to the wet unseasoned wood, or mishandled, resulting in falling timber, etc. even lost value. Fresh wood contains a lot of water, constantly evaporating water branch in a particular environment. Natural evaporation of moisture will cause the wood will shrink, cracking, bending, mildew and other defects seriously affect the quality of wood products, so the timber is made of various types of wood before the wood drying equipment must be used to force the timber (by control) drying.

Deep carbonized anticorrosive wood is widely used in wallboard, outdoor floor, kitchen decoration, mulberry house decoration, furniture and many other aspects. However, it is not recommended for use in contact with water and soil.

Wood carbonization mainly acts on hemicellulose, cellulose amorphous regions and hydrogen bonds connecting cellulose and hemicellulose.

The thermal modification of wood, also known as carbonization treatment, is the formation of carbonized wood by long-term pyrolysis treatment of wood with overheated steam at 160C~230C. Compared with chemical modification technology, thermal modification process and equipment are simpler, environmentally friendly, and have significant economic benefits. It has been widely used both domestically and internationally.

Carbonized wood is a homogeneous carbonization treatment of wood using high temperature without any chemical agents, so that the surface of the wood has a dark brown aesthetic effect, and has anti-corrosion and anti-biological invasion effects. It is stable, does not deform, is completely degreased and does not overflow, has good thermal insulation properties, is simple to construct, easy to paint, and has no special smell. It is an ideal indoor and sauna material and has become a new trend in bathroom decoration; it is anti-rot and anti-insect It is resistant to moth, deformation and cracking, and high temperature resistance, making it an ideal material for outdoor swimming pool landscapes.

Attention during the wood drying process: When the wood is first put into the kiln, it is in a low-temperature preheating and humidification process. The dry bulb temperature for low-temperature preheating is generally within the range of 35-45 ℃.

Wood drying machine is one of the wood working machines,today we’ll talk about the basic safety rules for wood working machines. Basic safety rules for wood working machines 1. Use mechanical feeding wherever possible. 2. Enclose all cutters and saw blades as far as practicable. 3. Ensure all machines are well maintained. 4. Ensure adequate lighting at every machine.

About the wood drying kiln steps and matters needing attention of choose and buy,today for everyone to introduce:

The equipment of a wood dryer is a large-scale device that is widely operated, and the safety issues in the production process of wood dryers should be taken seriously. Production must be safe in order to operate normally. In general, when there is a conflict between safety and production (such as personal and mechanical issues), safety must be the first priority. This experience was exchanged with blood and wealth, and must not be forgotten. In order to ensure safe production, the wood dryer must meet the following requirements: