Thermally modified wood also known as carbonized wood.After dealing with the thermal modification of wood has excellent corrosion resistance and prevent erosion performance, and its own material also more stable.Won’t appear easily cracking phenomenon.Especially after heat treatment of wood appearance, far better than the untreated wood.

Kiln drying equipment investment is big, the craft is complex, high cost, but quick drying, takes short, can be dry to any final moisture content, convenient for industrial production. Drying effect is better than natural drying, mainly using the kiln dried wood.

1. Density reduction Mainly from the partial loss of hemicellulose. Most studies show that 5-8% of hemicellulose is degraded with little sacrifice in structural strength.

The stress that appears on the wood section under the action of external force is called external stress, and the stress inside the wood without external force is called internal stress. The cracking and deformation of wood without any external force proves that there is indeed internal stress inside the wood. For example, the cracking of wood is caused by the destruction of wood tissue due to the tensile stress inside the wood exceeding the tensile strength limit of wood.

It is very important to adjust the temperature of Chiqin wood drying equipment, because appropriate temperature can improve the drying effect, ensure wood quality and reduce energy consumption. Here are some tips and considerations on how to adjust the temperature in your wood drying equipment. Adjusting the temperature of wood drying equipment requires considering the type and humidity of the wood. Different types of wood have different drying requirements, depending on the density and moisture content of the wood. Some woods absorb moisture more easily, while others are more difficult to absorb moisture. Therefore, the temperature adjustment should be selected according to the specific wood type and humidity conditions.

The kiln door system adopts the international popular aluminium alloy integral hanging type kiln door. The whole kiln door adopts the integral assembly type, double insulation. Kiln door sealing adopts high temperature special rubber, high temperature resistance, aging resistance, good sealing performance.

The heating equipment for wood drying kilns mainly includes the following types: 1. Boiler: Boiler is one of the commonly used heating equipment in wood drying kilns. The boiler transfers the heat energy generated by fuel combustion to the air or thermal medium inside the drying kiln, in order to increase the temperature inside the kiln and achieve the drying effect of wood. Common types of boilers include coal-fired boilers, oil fired boilers, gas boilers, etc.

1. Operators must truly record real-time indoor wet and dry bulb temperature and moisture content data to provide a true and reliable basis for adjusting the drying process. 2. After the kiln and heat pump dryer are installed, first turn on the heating, and then wait until the temperature reaches the target temperature before turning on the fan to reduce the ineffective operation time of the fan.

Regular maintenance and upkeep of drying equipment play a crucial role in its operation. The importance of maintaining drying equipment is as follows:

Notes on maintenance of wood drying kiln:Equipment inspection: Regularly inspect the kiln structure for cracks, deformations, and other issues to ensure overall stability. Temperature and humidity sensor calibration: Ensure the accuracy of the sensor for precise control of temperature and humidity.