The working capacity of the heat pump dryer is related to the environment in which it is used. After one year of continuous use, the interior of the heat pump dryer unit may become dirty and the working capacity will decrease. Therefore, special equipment inspection and equipment maintenance must be carried out. For this kind of inspection and maintenance work, it is recommended that you contact the heat pump dryer manufacturer or its maintenance department. Users should pay attention when using and maintaining this unit: all safety protection devices in the unit are set before leaving the factory, and do not adjust it by yourself. .

The wood dryer equipment is a large-scale equipment with various operations, and the safety issues in the production process of the wood dryer should be taken seriously. Production must be safe, and safety can lead to normal production. In the general environment, when safety and production conflict (such as personal and mechanical), the first thing to obey is safety

Do you know how wood drying equipment works? let me tell you.

A wood vacuum dryer is a device that removes moisture from the interior of a container by drawing air from the container to achieve a predetermined vacuum. When dry, the canister is under vacuum. The jacket is heated with hot water (or steam or thermal oil). As the tank rotates at a low speed, the material continuously moves up and down, entering a "diamond-shaped trajectory" inside and outside the tank, and absorbs and evaporates.

When the wood dryer is running in the main hall, the fuel inside the machine will burn outside to produce heat energy. These energies will be fully absorbed through the transfer medium, and then the medium will evenly spread the absorbed temperature throughout the large material box of the dryer, forming a high temperature of about 180 degrees. Then, the air in the entire furnace box is circulated by the thermal circulation fan inside the equipment. The high temperature combined with air circulation can achieve a drying effect that everyone can imagine.

The equipment of a wood dryer is a large-scale device that is widely operated, and the safety issues in the production process of wood dryers should be taken seriously. Production must be safe in order to operate normally. In general, when there is a conflict between safety and production (such as personal and mechanical issues), safety must be the first priority. This experience was exchanged with blood and wealth, and must not be forgotten. In order to ensure safe production, the wood dryer must meet the following requirements:

Drying process of wood heat pump dryer: 1. Install the wood according to the decoration standards, close the drying room, and turn on the control system. 2. Preheating: Turn on the heat pump and fan, set the upper temperature limit to 45 ℃. In order to save preheating and heating time, turn on the electric auxiliary system, and control the ambient temperature from 20 ℃ to 45 ℃ for heating and insulation time within 14 hours; At this stage, the energy efficiency ratio of the heat pump is around 3.5, operating at full load and the fan at full load.

Below for everyone to introduce wood drying equipment of energy conservation and consumption reduction method: 1. The application of inverter in the wood drying equipment, greatly save energy in drying equipment, using fan iscompared commonly big, and the fan are almost continuous operation, after using the inverter can save 30% energysaving. After the use of frequency converter, on the other hand, the overall equipment will drop a lot of noise, and prolongs the service life of wood drying equipment.

What are the basic concepts of wood drying, do you know?

The first cabinet of wood drying kiln was exported to Chile, and the company developed the new South American market.