Do you know how wood drying equipment works? let me tell you.

Wet wood suitable materials for industrial applications are usually used for low industrial, density, mechanical strength, mechanical properties, perishability, etc., not directly used, practicality and practicality after treatment and drying. It mainly has the following aspects.

A schematic diagram of the wood drying process. The wood waste collected during the wood processing process is burned in the boiler to provide thermal resources for the wood drying kiln.

Conventional drying kilns are generally composed of kiln body, kiln door (lifting door device), heating system, humidity control system, air circulation system, intake and exhaust system, detection system and control system.

The advantages of dehumidification and drying: 1Save energy;. 2, due to the low drying temperature, so the design of the drying room and the use of materials are not high requirements, as long as reasonable air tight, waterproof box insulation. Factories can simply design and build drying chambers themselves; 3. The peak energy required in the drying process is low; 4, the use of electric energy, little pollution to the surrounding environment.

There are many ways to dry wood, how many do you know? There are Solar drying, Vacuum drying, microwave drying, high-frequency drying and so on.

Before the wood drying kiln is used, a comprehensive and detailed inspection of its shell and equipment must be carried out to ensure the normal operation of the drying process. The specific inspection contents are as follows:(4) the formulation of drying process.

Before the wood drying kiln is used, a comprehensive and detailed inspection of its shell and equipment must be carried out to ensure the normal operation of the drying process. The specific inspection contents are as follows:(5)The operation of the drying process is carried out.

Wood drying is a relatively complex process. There are many specifications, varieties and uses of wood. Each enterprise needs to work out a drying process that suits its own products according to its own production characteristics. Thereby ensuring the dry quality of the wood.